1. Take a small saucepan. 2. Put water in pan (that's great tap water, or rainwater, it is not necessary to use bottled water).
3. Put the saucepan on the stove.
4. Turn on the stove.
5. After a few minutes the water will form bubbles which then rise to the surface, with a gurgling noise. The signal that the water is boiling.
Troubleshooting
the pot is empty.
It is normal: the water is usually not included, must be entered by the user.
I put the pot on the stove and opened the gas but the water does not boil.
not enough to open the throttle, you must light the flame with a lighter or a piezoelectric lighter. If the gas has been left open for a long time, do not turn on the light. Await the publication of the instructions on "How to turn on the gas."
I put the pot on the stove and turned on the stove correctly, but the water does not boil.
You have switched the focus wrong. It is important to start the fire over which you placed the pot.
I put the pot on the stove and turned on the corresponding fire, but water does not boil.
sure the pan, is the same where you put the water.
I hit the water while the bubbles and I was burned.
is normal. Boiling water burns because it has reached a temperature of 100 °. Relax.
0 comments:
Post a Comment